1·End play in drive pinion bearings.
驱动小齿轮轴承的端隙。
2·Worn teeth on ring gear or drive pinion gear.
环形齿轮或驱动小齿轮上齿磨损。
3·Worn teeth on ring gear or drive pinion gear.
根据齿轮啮合原理,建立了轮齿的精确齿形。
4·Refer to Drive Pinion Bearing Pre-Load Adjustment.
参阅驱动小齿轮轴承预荷调整。
5·Drive pinion to stop collar clearance shall be controlled to OEM specifications.
驱动器小齿轮到止推卡环的缝隙应控制在OEM 的标准之内。
6·The drive pinion is meshed with a large ring gear so that the ring gear revolves with the pinion.
传动齿轮与一个很大的冠状齿轮啮合,传动齿轮驱动冠状齿轮。
7·The driving power enters the differential through the drive pinion on the end of the propeller shaft.
也就是说,驱动力是从传动轴末端的传动齿轮输送到差速器的。
8·Power flows through the drive pinion, ring gear, case, and pinion shaft to the differential pinions. Then power splits equally and goes to the side gears, axle shafts, and drive wheels.
功率经过主动齿轮、从动锥齿轮、壳体和行星齿轮轴来到行星齿轮,然后功率被均分,送到半轴齿轮、半轴,最后到达驱动轮。
9·Resonable Designs: advanced rack and pinion drive in Y axis with larger speed and strength.
设计合理:采用先进的Y轴双齿条传动、速度快、力量大。
10·The utility model can drive a wire rope through the combination of a swinging mounting, a stationary wire spool, a gearwheel disk, a fixed tray, a pinion, a motor, etc. to attain automatic elevating.
它通过转动支架、固定绕线盘、大齿轮盘、固定盘、小齿轮和电 机等进行组合带动钢丝绳实现自动升降。