1·Deposited metal can meet high welding quality and corrosion resistance.
熔敷金属能满足较高的焊接质量和耐腐蚀性能。
2·In its substrate material: can deposited metal or form membrane of the material.
基体材料:能在其上沉积金属或形成膜层的材料。
3·The deposited metal also can be doped with platinum, tungsten or molybdenum, etc.
沉积金属时还可以掺入铂、钨或钼等。
4·Deposited metal fluidity better than 308l, on weld the operation too more superior.
熔敷金属流动性较308l为佳,在焊接操作上也更优越。
5·The microscopic analysis results indicate that deposited metal is hypereutectic structure.
测试结果表明熔敷金属为过共晶组织。
6·Dissolve deposited metal has low hardness and high toughness, heat corrosion resistance to impact abrasion.
溶敷金属具有低硬度高韧性,可耐热耐腐蚀耐冲击磨耗。
7·Submerged arc welding with the test welding wire matching sintered flux was carried out to get the deposited metal.
对所研制的焊丝匹配烧结焊剂进行了熔敷金属的埋弧焊试验。
8·By adding magnesium powder into the coating of electrode, the sulphurs removal in deposited metal was satisfactory.
通过理论分析及实验,探讨了手工电弧焊焊条药皮中添加金属镁粉的脱硫效果。
9·The transition coefficients of alloying from cored wire to deposited metal during CO2 GMAW have been studied in this paper.
研究了药芯焊丝在CO2保护电弧堆焊过程中合金元素的过渡系数。
10·Deposited metal of martensite with high hardness, good abrasion resistance, impact resistant performance of hardness HRC55 ~ 58.
熔敷金属具有高硬度的马氏体组织,耐磨耗耐冲击性能优良,硬度HRC55 ~ 58。