1·Addition of co-crosslink agent increased the degree of crosslinking and shortened the vulcanization time.
加入共交联剂，可以提高交联程度，缩短硫化时间。
2·The surface topography of viscoses changed obviously, and the grooves disappeared gradually as the degree of crosslinking increasing.
随着交联程度的增加，纤维的表面形貌变化比较明显，黏胶纤维表面的凹槽逐渐消失。
3·Conclusion: the property of resin is good when the brine's concentration is 30%, the degree of crosslinking is 14%, methyl benzene as diluent is 0.1.
结论：盐溶液浓度约为30%，交联刺14%，致孔剂甲苯为单体的0.1倍时，所得树脂性能良好。
4·The graft ratio, degree of crosslinking, processing rate of pipe and storage life of silane crosslinked PE product were better than those of the product by one-step process.
两步法在接枝率、交联度、管材成型速度和物料存放时间方面优于一步法。
5·From the data of gel parameters and their chromatographic characteristics, it can be derived that even in gels of low degree of crosslinking certain degree of uneven crosslinking is prevailing.
测定填料的结构参数，并与色谱性能结合，指出即使是低交联度的凝胶也存在非均匀的分子链网孔结构。
6·The influences of monomer concentration, neutralization degree, crosslinking agent and radiation dosages on absorption performance of crosslinking poly (sodium acrylate) were studied.
研究了单体浓度，中和度，交联剂，辐照剂量等因素对交联聚丙烯酸钠吸水性的影响。
7·The influences of reactive conditions such as crosslinking degree, neutral degree, temperature and monomer proportion to the absorbency were investigated.
研究了聚合过程中的反应条件，如交联度、中和度、温度、单体配比等对吸收性能的影响。
8·OBJECTIVE: To study the relaxation of in situ crosslinking degree induced by calcium cations in the pectin-based matrix tablets.
目的：研究钙离子诱导的果胶分子在体交联度松弛的机理。
9·The amount of structural hydroxyl loss can be correlated with the crosslinking degree of AL-CLS.
层结构羟基丢失的难易程度与交联度有关。
10·The product with too high crosslinking degree could decrease the tensile strength and elongation of its modified PVC.
交联度过高的产品会降低改性PVC的强伸性能。