1·Control of the debinding process.
脱脂过程的控制。
2·The binder can be removed by the step-by-step debinding.
粘结剂可以采用分步脱脂法脱除。
3·The next step, solvent debinding was done in water bath equipment.
注射坯的溶剂脱脂在恒温水浴装置中进行。
4·The suitable solvent-thermal debinding and sintering processes were established.
确定了合适的溶剂脱粘+、热脱粘+工艺。
5·Control of debinding atmosphere, carbon and preventcobalt liquid volatilization and rapid cooling;
多气氛控制脱除成型剂、正碳以及防止钴液相挥发和快速冷却；
6·Low temperature thermal debinding non-isothermal kinetics of paraffin wax in PIM was studied by TG.
摘要利用热重法研究了石蜡在粉末注射成形中低温热脱除的非等温动力学。
7·The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
8·Several kinds of solvent debinding binders with their performance in particular, the principle of solvent debinding are reviewed.
介绍了几种溶剂脱脂型粘结剂及其优缺点。
9·Big critical thickness means fast initial heating can be performed, which means the time for debinding can be comparatively shorter.
临界厚度越大，意味着脱脂初始阶段升温速率可以较快，脱脂所需时间可以相对缩短。
10·Two elements, siphonage temperature and siphonage time, that influence siphonage debinding for billets made by metal injection molding were investigated.
研究了温度、时间对金属注射成形坯料虹吸脱脂的影响，以及虹吸脱脂对后续热脱脂升温速率的影响。