1·In addition ADI has advantages of lower density, low cost, low energy consumption, batter damping capacity.
此外adi还具有重量轻，成本低，能源消耗低，减震性好等特点。
2·The damping capacity in cast condition is dependent on strain amplitude, and it increases with its enhancement.
铸态合金的阻尼性能与应变振幅有关，随着应变振幅的提高而不断提高；
3·Next, after heat treatment, the mechanical properties and damping capacity of above deformed alloy was investigated.
接下来，研究了上述变形态镁合金经热处理后的力学性能和阻尼性能。
4·The damping capacity at room temperature is highly sensitive to strain-amplitude and frequency, as well as the static load.
合金的室温阻尼性能强烈地依赖于频率、应变振幅以及静载荷的大小。
5·The results show that the damping capacity of the deposite is 2. 8 times more than that of the conventional casting ZA27 alloy.
实验结果表明，与常规铸造条件相比，喷雾沉积和合金化使材料的阻尼性能提高2．8倍；
6·A new propeller alloy with high strength, high damping capacity and excellent corrosion resistance has been put to damping effect test.
本文介绍了一种新型的高强度、高阻尼、耐腐蚀性优良的螺旋桨专用合金在降噪效果方面的试验研究成果。
7·Based on the principle of sonic resonance, resonant frequency and damping capacity are used as two parameters to test the volume online quickly.
依据音频共振原理，利用共振频率和内耗两个音频参数的共同作用，快速在线检测弹体药室容积，并用此法与传统的“水称重”法进行理论和实验对比分析。
8·And it was also found the annealing treatment and the heat recycling treatment could improve the damping capacity of magnesium matrix composite.
镁基复合材料的阻尼性能与其状态关系密切，退火处理和热循环处理提高了复合材料的阻尼性能。
9·Cast metallic matrix self-lubricating composites, which possess excellent antifriction, wear resistance, damping capacity, etc., have been investigated extensively.
铸造金属基自润滑复合材料具有良好的减摩、耐磨与减震性能，因而人们正在进行广泛的研究。
10·The porous Mg exhibits a higher damping capacity, a longer and lower stress plateau than porous Al, suggesting more superior energy absorption and damping properties.
多孔镁具有更高的阻尼本领、更平坦的压缩应力-应变平台，在冲击能吸收结构中应用应更具有优势。