1·Bearing rings and washers cylindrical surface to the radial guide cage.
轴承套圈和垫圈的圆柱形表面,用以在径向引导保持架。
2·An annular groove is arranged on an outer circular cylindrical surface of the brake disc.
在刹车盘外环柱面上有环形凹槽。
3·The law of panoramic perspective on cylindrical surface about points, lines, and surfaces is is summarized.
总结了点、线、面的圆柱面全景透视的规律。
4·Therefore, the pump with the screw and screw and screw cylindrical surface gap should be as small as possible more.
因此,泵体与螺杆外圆表面及螺杆与螺杆间隙应尽可能小些。
5·Therefore, the pump body and screw cylindrical surface and screw and screw clearance should be as small as possible.
因此,泵体与螺杆外圆表面及螺杆与螺杆间隙应尽可能小些。
6·Meanwhile, a new algorithm for the development of the cylindrical surface is presented and the errors are analysed and modified.
同时,提出了一种筒体展开的算法,并进行了误差分析与修正。
7·For the elliptic cylindrical surface which is the trunk of the blade, the geodesic and non-geodesic differential equations are deduced.
并针对叶片主干部分的椭圆柱面,分别推导其测地线和非测地线的微分方程序。
8·This paper established the mathematical model of SPLIT drill basing on the involute cylindrical surface, and conducted real edge grinding.
本文建立了基于渐开圆柱面的SPLIT钻数学模型,并进行了实际刃磨。
9·An eight-node solid element with two parallel faces and one traction-free cylindrical surface is derived using the assumed stress hybrid method.
应用假设应力杂交元的方法,导出了一个八节点的实体元。此元具有二个平行的表面及一个无外力自由的园柱表面。
10·A new grinding method of non-cylindrical surface is proposed and the key control techniques of the grinding methods have been discussed in this paper.
研究了非圆柱表面磨谢加工新方法,对该磨削加工方法的关键技术进行了探讨。