1·The cutting force reduce with the increase of water pressure.
切削力随着水射流压力的增大而减少。
2·At first, the discuss of cutting force analysis modeling is made.
首先对切削力的解析建模进行了探讨。
3·At last, the cutting force model is validated through cutting tests.
最后,通过切削实验对切削力模型进行了验证。
4·The cutting force can notably be deduced using the cutting fluid during machining.
在切削加工中,使用切削液能显著降低切削力。
5·PCD tool is the best tool material for precise machining from points of the cutting force view.
从切削力这一因素来看,PCD是精加工颗粒增强铝复合材料的最佳刀具材料。
6·The singular index of cutting force signal is proposed as a parameter for detecting cutter's wear.
提出采用切削力信号的奇异性指数作为衡量刀具磨损的参量。
7·The real-time obtaining of cutting parameters is one of the key technologies of cutting force prediction.
切削用量的实时获取是切削力预测的关键技术之一。
8·The estimated cutting force and the feedrate are the controlled output and the control input, respectively.
估计的切削力和进刀速度分别是受控的输出和控制输入。
9·An orthogonal cutting force model with tool flank wear has been analyzed based on cutting test investigation.
在试验研究基础上进行了有后刀面磨损的正交切削模型分析。
10·Dynamic cutting force of blade was an important parameter reflecting the cutting process during the cut of sugarcane.
甘蔗切割过程中,割刀动态切割力是反映切割过程的一个重要参数。