1·The results show that the main factors of corrosive wear are electric chemistry and hardness.
试验结果表明:影响砂蚀磨损性的主要因素为电化学性能和硬度。
2·The linear relationship, with different slopes between corrosive wear and loads was confirmed.
结果表明载荷与腐蚀磨损间仍然存在线性关系。
3·There are five forms of wear and wear: abrasive wear, erosive wear, adhesive wear, fatigue wear and corrosive wear.
磨损有五种磨损形式:磨料磨损、冲蚀磨损、粘着磨损、疲劳磨损和腐蚀磨损。
4·The dependence of plating composition, structure and the behaviour of corrosive wear resistance on plating temperature is also discussed.
讨论了施镀温度对镀层成分、结构和抗腐蚀磨损行为的影响。
5·The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。
6·The paper analyses the heavy losses made by erosion corrosion and corrosive wear based on the definition, classfication and industrial background.
从定义、分类、工业背景几个方面分析了由腐蚀磨损和冲刷腐蚀所造成的巨大损失。
7·For corrosive environments, where dirt and abrasives may be ingested, and cause seals to wear faster than normally expected, the AFO offers the benefit of tie rod construction.
因为,腐蚀性环境中,灰尘和磨料可能摄入,并导致密封穿比通常预期的速度更快,踝足矫形器提供了拉杆工程受益。
8·When daily use will cause some wear and tear epoxy floor, so we must use some of the main issues, do not stress, do not use corrosive stuff, all kinds of forklifts, hydraulic car use frequency.
环氧地坪的日常的使用时会造成一些磨损和破坏,所以我们一定主要一些使用事项,不要重压,不要使用带腐蚀性的东西,各种叉车、液压车的使用频率等。
9·Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况,表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
10·Mechanical strength, machinability, surface corrosive and wear abrasion of a new type glass ceramic composed of fluorophlgopite Ca-mice were studied in this article.
研究了一种新型的钙云母为主相高强度的可切削玻璃陶瓷的力学性能、可加工性、表面耐腐蚀性、耐磨耗性。