1·Release connecting rods at stabiliser.
释放稳定器的连接杆。
2·Crankshafts and connecting rods are not standardized.
曲轴以及连接杆都是没有标准的。
3·Remove piston and connecting rods from crankshaft journals.
从曲轴颈上拆下活塞和连杆。
4·I-shaped cross section connecting rods are made of carbon steel.
工字型截面连接杆件是由碳制成。
5·Connecting rods and pistons are removed as assembly from the engine.
把连杆和活塞做为整体组件从发动机上拆卸下来。
6·The connecting rods were just completed, and Tom's photos are shown here.
该连杆刚刚完成,汤姆的照片,在这里显示。
7·Crankshaft and connecting rods are new, and made out of very high strength steel.
曲轴,连杆是新的,并提出了非常高强度钢。
8·The needle foot (1) and the pen foot (2) are connected with a pair of connecting rods (3).
在针脚(1)、笔脚(2)上连接有一对连杆(3)。
9·Piston and connecting rods are crack tested in accordance with test equipment instructions.
根据监测设备要求对活塞与连杆作裂缝检测。
10·The two connecting rods forming a certain angle are adjustable to realize different rotary angles.
两个连杆之间有一定的角度,可调节位置,实现旋转的不同角度。