conical section

锥形截面
常用释义
锥形截面;二次曲线;圆锥曲线

例句

1·The drive tool component (100) includes alternating flutes (104) and lobes (106) and has a conical section (108).

驱动工具部件(100)包括交替的凹槽(104)和凸齿(106),并且具有锥形部分(108)。

2·The lower part, the conical section of the furnace and other fray easily area are covered with refractory to protect the heating surface.

炉膛下部锥段以下及炉内其它易磨损部位敷设耐火浇筑料,以保护受热面。

3·Problem is the most value conical section the key and difficult point for high school maths problem, is generally and other content combine comprehensive problem.

圆锥曲线最值问题是高中数学中的重点和难点问题,一般是和其他内容联合起来的综合题。

4·The lobes (106), rather than being tapered in the conical section (108) of the socket (102), are each uniform in width in the process of extending to an end of the socket (102).

凸齿(106)中的每一个在其延 伸到套头(102)的末端的过程中宽度保持一致,而不是在套头(102)的 锥形部分(108)中形成锥度。

5·Their conical sphenoid part, for the configuration of which at least four conical surfaces are used, can have the same cross section all over its length or different cross-section per parts.

圆锥楔形体的结构至少有四个圆锥面组成,在每个面上,可以使用相同的横截面,也可用不同的横截面。

6·The effects of R/h ratio, L/R ratio and cone angle on the dynamic response of the conical shells are discussed in this section.

分析了圆锥壳结构的径厚比、长径比及锥角变化对结构应力响应的影响。

7·The distribution law of horizontal cross section area of ring forging and ring blank is put forward to describe the rolling formability of conical ring with inner steps.

对内台阶锥形环件轧制难度进行了分析,提出用环件锻件和轧制毛坯的水平横截面积分布规律来描述内台阶锥形环件的轧制难度。

8·The mixing section comprises a conical inlet of the mixing section and a variable section mixing chamber.

混合段包括混合段锥形入口和变截面混合室。

9·As you can see, some experimentation was done with a "swirl-induction" system and another conical front-section with rearward facing intake tubes.

正如你所看到的,一些试验做的目的是“涡流感应系统”,另一个锥形前与后方面临的摄入管节。

同义词

锥形截面;二次曲线;圆锥曲线