1·A metal squeezing shaping method for a rotary cavity die relates to a proximate matter squeezing shaping method.
旋转凹模的金属挤压成形方法，它涉及一种型材挤压成形方法。
2·The reason to be damaged in production for cavity die in CONFORM continuous extruder is analysed and measures to prolong its lifetime recommended.
分析了Conform连续挤压工装件——腔体在生产工艺中损坏的原因及提高腔体使用寿命的措施。
3·The failure form of rotary roll cavity die for straight tooth bevel gear was analyzed, and the finite element simulation method was employed to change the processing parameter of rotary roll.
分析齿轮摆辗凹模的失效形式，并且通过改变直齿圆锥齿轮摆辗的工艺参数的有限元模拟，探讨了凹模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响以及对凹模失效形式的影响。
4·Powder metallurgy (Fig. 5.1) USES sintering process for making various parts out of metal powder. The metal powder is compacted by placing in a closed metal cavity (the die) under pressure.
粉末冶金(图5.1)采用烧结工艺将金属粉末制成各种各样的零件。金属粉末放在封闭的金属腔(模具)中在压力下被压实。
5·The fluid material takes the shape of the die cavity and this geometry is finally stabilized by the solidification of the material.
液体材料充满型腔，随着材料的凝固，零件的几何形状最终固定下来。
6·The cutters used in high speed machining(HSM) have poor rigidity, therefore the method fits to HSM of die cavity due to the unfluctuating cutting force characteristic.
其切削力平稳的特性更适合于模具型腔的高速数控加工，可以克服高速加工用刀具刚性差的不足。
7·This paper advanced a study method that can observe plastic deformation behavior of surface layer of die cavity by showing austenite grain, size, crack morphology and propagation mode.
提出了通过显示奥氏体实际晶粒度、裂纹形貌和扩展方式来分析热锻模具型腔表层塑性变形行为的试验方法。
8·So it adopt cubic spline function to structure die cavity outline in this article, the model points may be surveyed on die cavity surface.
因此，这里采用三次样条函数拟合曲线构造模具型腔廓线，其型值点由已有模具型腔测得。
9·Multiple die with hydraulic compensating device adopts the design of multi-dies gathering in a common grease cavity, using high temperature lubricating grease as the pressure compensating medium.
多冲模液压补偿装置采用多个冲模集于同一油脂腔中并用高温润滑油脂作压力补偿介质。
10·An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.
通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。