1·General carburizing and quenching after use, can also be used after quenching and tempering.
一般渗碳及淬火后使用，也可以调质后使用。
2·Top low carbon alloy steel as gear material, adapting automatic carburizing and quenching heat treatment.
齿轮材料选用高级低碳合金钢，使用自动化高温渗碳淬火处理。
3·Purpose: Widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
用途：广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
4·Applications: widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
用途：广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
5·Carburizing and quenching, with high surface hardness, good toughness characteristics, the heart of cold plastic deformation of medium, cutting is good.
经渗碳及淬火后，具有表面硬度高、心部韧性好的特点、冷变形塑性中等，切削加工性好。
6·The distortion of gears and gear shafts resulting from carburizing and quenching is difficult to avoid in production, and the reduction in distortion is a difficult problem in technique.
在生产中，齿轮和齿轮轴的渗碳和淬火畸变是难以避免的，减小其畸变量是一个技术难题。
7·Employing abrasive machining for the form of the gear and intellective-control carburizing and quenching technology for the surface, the gear is with high intensity, strong tenacity and wearability.
齿轮齿形采用磨齿加工，齿面采用智能控制渗碳淬火技术，齿轮的强度高、韧性和耐磨性好。
8·The distortion of gears will take place during carburizing and quenching and, as a result, reduce precision of the gears and increase noise, or will even cause unbalanced load-bearing of the gears.
齿轮在渗碳淬火中会产生变形，直接影响齿轮的精度，增大噪音，甚至造成偏载。
9·The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
10·The paint film can peel off automatically from the surface in quenching procedure after carburizing, and it does not affect the quenching effects.
工件渗碳后直接淬火，涂料壳膜可从工件表面上自行脱落，不影响淬火效果。