1·Finally a recommended equation for local buckling stress is also given.
最后给出了圆柱薄壳的局部屈曲应力的建议公式。
2·Results denote that effect of the buckling modes and the small scalar size on the buckling stress is interrelation.
研究结果表明小尺度参数和屈曲模式对碳纳米管屈曲应力的影响是相互关联的。
3·Results The load-bearing stress, buckling stress, rotation stress have greater impact on the jiggle of the armor plate fixed fracture broken end.
结果承重应力、屈曲应力、旋转应力对钢板固定的骨折断端产生较大微动。
4·It is found that the critical local buckling stress and diameter to thickness ratio of circular steel tube are considerably increased by the support of filled concrete.
由于内部混凝土的存在，大大提高了薄壁钢管的临界屈曲应力和径厚比。
5·The Angle deflection, buckling stress of insulator, horizontal load and vertical load were recorded. The mechanical failing load test was performed on buckling insulator.
监测了角度偏移、受压复合绝缘子的应力及水平荷载和垂直荷载，并在多次试验后对受压绝缘子进行了机械破坏负荷试验。
6·The effects of the connectors on the critical buckling load and the bending stress of pipes in horizontal section are analyzed.
分析了钻杆接头对水平井段钻柱屈曲临界力和弯曲应力的影响，提出了计算钻柱正弦屈曲临界力的新方法。
7·The dynamic buckling of elastic structures, such as beams and plates, when subjected to an axial impact at one end, is studied in the present paper based on the theory of stress wave propagation.
本文借助于应力波传播规律研究了弹性梁板结构在冲击载荷作用下的动态屈曲问题。
8·We adopt five nodes difference method to solve thermal stress problem and thermal buckling problem, because this method is more precise.
在平面温度应力问题和热屈曲问题的计算中，采用了精度更高的五节点差分法来进行计算。
9·Several standards for the design of expansion joint were compared in terms of application scope, stress evaluation, buckling check and fatigue life calculation.
对几种常用膨胀节设计标准在适用范围、应力评定、失稳校核和疲劳寿命计算等方面进行了对比分析。
10·The critical load and critical stress were deduced by means of energy principle and catastrophe theory based on these conditions, and the buckling model of pillar was presented.
在此基础上，应用能量原理及突变理论推导矿柱失稳的临界载荷及临界应力，提出矿柱发生失稳的屈曲模型。