1·Main products: Brake disc, Brake drum, Brake Pad.
主要展品：刹车盘，刹车鼓，刹车片。
2·It has to be set up for the respective brake disc type.
每一种制动圆盘型号都必须对平衡机进行单独设定。
3·The brake disc types intended for production are listed in Section 7 Technical data.
预期用于生产的制动圆盘型号请见技术数据第七部分。
4·An annular groove is arranged on an outer circular cylindrical surface of the brake disc.
在刹车盘外环柱面上有环形凹槽。
5·All brake disc types intended for production are manually placed in a specially designed holder.
所有预期用于生产的制动圆盘型号都需要手动放置到一个特殊设计的夹头上。
6·The main parts of a disc brake include the brake cylinder, the brake disc and the brake calipers.
盘式制动器的主要部件包括制动缸、制动盘和制动钳等。
7·Grooves on an inner circular edge of the upper plane of the brake disc are uniformly distributed.
在刹车盘上平面内环边沿有凹槽，凹槽均匀分布。
8·The result of the bench test shows that the newly developed brake disc has fairly good braking performance.
台架试验结果表明，新研制的制动盘具有良好的制动性能。
9·After all, the brake disc wear too severe, it will become very thin thickness, will affect the normal travel.
究竟，制动盘磨损得太严峻，它的厚度就会变得很薄，随时会影响到正常行进。
10·When brake disc wears enough to affect safety in operation or can 't adjust clearance, this is called failure.
当制动盘磨损到影响安全操作或制动间隙无法调节时，即为失效。