1·When the two sockets are spaced apart, the bellows expansion joint is in the rest (non-stressed) position.
当两个插座的间距外，波纹膨胀节的休息(非，强调)的立场。
2·When the release socket is driven closer to the spring socket, a stress is exerted on the bellows expansion joint (6, 7).
当释放套接字驱动接近春天插座，一个是施加压力的波纹膨胀节(6,7)。
3·Measures for adopting bellows expansion joint have been proposed to meet the requirement of allowable force in the inlet of pump pipeline.
为满足泵管口的受力要求，提出了采用波纹管补偿器时应采取的措施。
4·And further research work should be conducted in the future. This paper is the continuation of "the discussion on the design of the lugs and end rings of metal bellows expansion joint".
本文是《金属波纹管膨胀节端板设计问题讨论》和《金属波纹管膨胀节端板设计问题探讨》的继续。
5·The design of structural parts of metal bellows expansion joint was discussed. Some Suggestions in this paper were not experimented and were only for reference, or to attract discussion and regard.
针对某几种膨胀节的构件设计问题提出一种设计方法，有些方法尚未经过实验验证只供参考，或引起讨论和重视。
6·The results show that the stress corrosion is the main failure causing of the bellows expansion joint, while the local pit corrosion, residual stress and the working stress is the necessary condition.
结果表明，应力腐蚀是该膨胀节失效的主要原因，而局部的点蚀和残余应力、工作应力是应力腐蚀的必要条件。
7·This paper introduces the experience of installation for metal bellows - expansion joint, which is very useful for practical construction.
介绍安装金属波纹管膨胀节的实际施工经验，它有较大的实用意义。
8·Bellows are the basic units of an expansion joint.
波纹管是组成膨胀节的基本元件。
9·This paper presents some information about the design and application of bellows type expansion joint used in heat-supply network, taking Yangquan Power Plant No.
以阳泉第二发电厂新建工程为例，介绍了厂区供热管网中波纹管补偿器的设计及应用情况。
10·The result of test of plane stability is analyzed as well when the expansion joint bellows are subjected to internal pressure and internal pressure together with compression deformation.
文中同时分析了压力及内压与压缩位移一齐作用时的平面稳定性试验结果。