1·It consists of a circular support frame mounted on to the back plate.
它由安装在底板上的圆形支撑框架组成。
2·This consists of two rectangular support blocks mounted on a back plate.
这种格架由两块安装在底板上是矩形支撑块组成。
3·Changed the location of the Keyhole in the back plate to 7 "from the edge. Please note".
改变后板孔的位置,离边缘要有7英寸,请注意。
4·Advantage: frame can open, make replacing hammer head, back plate and lining board work easier.
优势:机架可以开启,使得更换锤头、反击板及衬板的工作更加简便易行。
5·Situate the steering knuckle assembly so that it fits on to the cross member knuckle back plate.
位于该转向节大会,以便它适合于板的横梁关节回来。
6·The most common type encountered is the rectangular frame constructed of four support blocks suitably mounted on a back plate.
最常用的类型是矩形框架由适当地安装在底板上的四块支撑块组成。
7·It is important for the beginner to note that the core pin extend completely through the sleeve, and is attached to the back plate.
对于初学者来说重要的是注意型芯延伸完全穿过顶管,并且安装在底板上。
8·No back plate growing method is to electroform metal microstructure on the metal substrate directly by low-cost UV-LIGA technology based on SU-8 photoresist.
无背板生长法是利用SU - 8光刻胶,通过低成本的UV - LIGA技术,直接在金属基板上电铸镍图形来实现的。
9·The test paper strip mainly comprises a sample pad, a binding pad or a binder release pad, an analyzing membrane, a water absorbing pad and a plastic back plate.
其结构主要包括:样品垫、结合垫或结合物释放垫、分析膜、吸水垫和塑料背板。
10·The straw picture with the active carbon fibre is characterized in that an active carbon fibre layer is designed between the straw picture layer and the back plate.
位于麦杆画层与后板 之间设计有活性炭纤维层;