1·Electroplating, magnesium alloy, and other anodic treatment agents.
电镀，镁合金，阳极处理相关处理剂。
2·In addition, an insulation layer is formed for covering the electronic emission sources and the anodic treatment layer.
此外，形成一绝缘层，以覆盖电子发射源及阳极处理层。
3·The importance of surface cleaning before replating, reverse electro-etching (anodic treatment) as well as low-voltage and small-current plating, and some problems needing attention were emphasized.
介绍了在已有铬层上补镀硬铬的方法，强调了补镀前表面净洁、反电刻蚀(阳极处理)、低电压小电流起镀等工艺的重要性及应注意的问题。
4·LED lights use high-quality 6063 aluminum venture, the special anodic oxidation treatment.
LED 斗胆灯选用优质6063铝材，经阳极特殊氧化处理。
5·T73 and RRA treatment improve the grain boundary character, which is help to inhibit hydrogen embrittlement and decrease anodic dissolution rate, then to improve the SCCR of the alloy.
T73和RRA时效处理改善了合金晶界特性，有助于阻止氢脆、减缓晶界阳极溶解速度，提高合金的抗应力腐蚀能力。
6·99% high purity aluminum reflector, anodic oxidation treatment, high reflection efficiency.
采用99.99%高纯铝反射器，阳极氧化处理，反射效率高。
7·Meanwhile the mechanism of the anodic oxidation treatment to improve the interfacial property of composites is obtained by analyzing the results.
同时通过实验结果分析，阐明阳极氧化处理使复合材料界面性能改善的机理。
8·Treatment of anodic oxidation on surface and good compatibility of electromagnetism, communicate the high value of the design concept.
阳极氧化的表面处理，良好的电磁兼容，传达高价值的设计理念。
9·Diethylene Triamine Penta Methylene Phosphonic Acid (DTPMP) is applied to hydration resistance treatment of anodic oxide films, which treating method is same as that of ATMP.
提出以二乙烯三胺五甲叉膦酸（DTPMP）为耐水合处理试剂，耐水合处理方法同ATMP。
10·Under the spark discharge treatment, the structure of the anodic layer was significantly changed, the enrichment of silicon and oxygen was enhanced, and the surface potential was ennobled.
发现火花放电不仅改变氧化膜的表面形貌结构，还能够促进氧化膜表面硅、氧元素的富积，并使火花放电区域的表面电位正移。