1·Manufacturing process of aluminum extrusion die was introduced.
介绍了常用的铝型材挤压模具的制造工艺。
2·Rugged aluminum extrusion supports the linear rail system through the entire stroke length.
坚固的铝挤压支持通过整个行程长度的直线铁路系统。
3·Provide aluminum extrusion processing, surface oxidation, coating, wood, silk screen processing, the follow-up processing.
提供铝型材挤压加工，表面氧化、喷涂、木纹、丝印处理，后续深加工。
4·Those four are high end products for aluminum extrusion machinery and equipment, we are proud of that we have those four products at same time.
这四个产品都是铝材机械装备行业中的高端产品，我们为能同时拥有这几个产品为自豪。
5·Business Scope: Precision Aluminum Extrusion bar and it's products used in HDD actuator, automobile, telecommunication and power supply industry.
经营范围：生产和销售汽车、电脑、通信及供电设施等高级铝合金型材及其产品。
6·A renumbering algorithm has been presented which can optimize the node of die hence reduction of the bandwidth of FE in aluminum extrusion process.
本文用一种新的结点重编号算法对铝型材模具网格结点编号进行了优化，减少了有限元带宽。
7·Abstract: There is significant demand to reduce variations in the shape and mechanical properties of aluminum extrusion process to meet tighter tolerance requirements.
摘要： 设计的某款散热器铝型材挤压模，对试模后的型材进行装配，水平度达不到要求；
8·The design of the aluminum extrusion air flow table of the utility model can improve the imperfection that the structure of commonly known air flow table is proteiform.
由本实用新型的铝挤型气浮平台的设计可改善公知气浮平台的结构易变形的缺陷。
9·The simulation results show the validity of employed finite element method and it can provide theoretical instruction for aluminum extrusion die design and technique parameters selection.
模拟结果表明所用有限体积法是有效的，可以为铝型材挤压的模具设计与工艺参数的选择提供理论指导。
10·The result is the aluminum is difficult to push through the die at the beginning of the cycle and the extrusion speed must be reduced at the back of the billet to prevent defects.
其结果是，在挤压周期开始时铝锭难以被挤压通过模具，铝锭后部的挤压速度必须被降低，以防止挤压出废品。