1·Tighten the disc height adjusting screw.
压紧盘片，调整螺旋高度。
2·The high step moves from under the adjusting screw.
高点从调节螺钉下移动。
3·The high step moves from under the adjusting screw.
使高点从调节螺钉下移动。
4·The adjusting screw rests on the high step of the CAM.
调节螺钉落在凸轮高点上。
5·Heavy duty adjusting screw. Adjusting screw is both slotted and knurled.
重型调节螺丝。调节螺丝既有槽也有花纹边。
6·To lower the reduced pressure - turn the adjusting screw counterclockwise.
如果要降低水压，则逆时针方向旋转调节螺丝。
7·To clean or replace parts; shut off supply, loosen lock-nut and back off adjusting screw.
如果要清洗或更换部件，关闭供应管道，松开锁紧螺母，退出调节螺丝。
8·The upper end of the adjusting screw (7) is provided with a frustum-shaped valve needle (6).
所述调节螺杆(7)的上端具锥台形阀针(6)。
9·If the machine parts don't have adjusting screw caps, then it can be solved by turning the head covers.
如果机构是没有调整螺盖的，可用车削端盖的方法来解决。
10·Adjusting screw for outlet gas pressure is set on reducer; it can adjust working pressure for requirements.
减压器上设有出气压力调整螺钉，通过调整出气压力螺钉来调节喷气阀所需求的工作压力。