1·Selection of master rubber and acrylic monomer was described.
对接枝母体胶料和丙烯酸单体进行了选择。
2·A newly developed grafting copolymer of synthetic rubber with acrylic monomer has been reported.
报道了将丙烯酸单体接枝到合成橡胶上的接枝共聚方法。
3·Because of its brittleness and poor compatibility, it has been modified with a soft acrylic monomer to form a corrosion protective coatings with excellent mechanical properties and appearance.
由于其脆性及混溶性差，用柔软的丙烯酸单体改性，可制得物理机械性能和外观优良的防腐蚀涂料。
4·A branched fluorine - containing acrylic resin has been developed through solution polymerization at normal pressure with liquid fluorine - containing acrylic acid monomer and acrylate monomers.
将液态含氟丙烯酸单体与丙烯酸酯类单体采用常压溶液聚合工艺，合成了支链含氟的丙烯酸树脂。
5·Acrylic resin is diluted in ethyl acetate and the remnant monomer is well separated from it by gas chromatography and is quantificationally measured by hydrogen flame ionization detector (FID).
乙酸丁酯稀释丙烯酸树脂后，用气相色谱法使丙烯酸树脂中的各种残余单体得到较好分离，再采用氢火焰离子化检测器(FID)定量测定。
6·Active monomer and acrylic esters were introduced to improve the thickening property and electrolyte resistance.
引入活性单体和丙烯酸酯来改善聚合物的增稠性能和抗电解质性能。
7·Studies were made of preparation of acrylic latex coating crosslinked at ambient temperature with diacetone acrylamide (DAAM) as crosslinking monomer and adipic dihydrazide as curing agent.
对以双丙酮丙烯酰胺（ DAAM）为交联单体，己二酰肼为固化剂制备室温交联丙烯酸乳胶漆进行了研究。
8·This paper studies that modified emulsive acrylic pressure - sensitive cement's stripping capability is influenced by initiator, monomer and temperature.
本文研究了引发剂、单体种类、温度对水乳型丙烯酸酯压敏胶改性后的剥离性能的影响。
9·Acrylic acid and its ester derivatives are important raw materials for the chemistry industry, as monomer, via homopolymerization and copolymerization, it can synthetic thousands of polymers.
丙烯酸及其酯类是一类重要的化工原料，作为聚合单体可以经均聚和共聚合成成千上万的聚合物。
10·The grafting technology of acrylic acid monomer grafting polypropylene nonwoven fabric is explored.
本文探讨了丙烯酸系单体接枝聚丙烯非织造布的接技工艺。