1·Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
无损检验。超声波。超声波检验仪器的测定方法。
2·In the field of non destructive testing, the ultrasonic inspection of neoprene coated is a new and developing technique which has not been used in domestic so far.
橡胶涂层的超声检验在无损检测领域中是一门新兴技术,在国内尚未得到应用。
3·The phase-shifting method which is used in ESSPI can improve the precision of the measurement greatly. So the phase-shifting method is used in Non Destructive Testing widely.
而在ESSPI的定量测量中应用相移技术,可以使测量精度大为提高,因此被广泛用于无损检测领域。
4·Infrared thermographic non destructive testing (it NDT) was increasingly used in the inspection of composite materials due to large surface, rapid and noncontact testing capabilities.
红外热成像无损检测由于检测面积大、速度快和非接触从而在复合材料缺陷检测中的应用越来越广泛。
5·The systematic testing of components or equipment during manufacturing makes this non-destructive condition mandatory when testing a sample.
在元器件或设备生产过程中的系统化测试,测试样品时对样品不产生破坏是强制性条件。
6·En 473 Non-Destructive Testing-Qualification And Certification Of NDT Personnel-General principles.
EN 473无损测试人员认证和证书——通用标准。
7·Babcock International has developed a new non-destructive testing (NDT) technique for naval ship tailshafts that could reduce assessment time from 18 weeks to one month.
Badcock国际部开发了一种新的无损(NDT)海军舰船尾轴的测试技术,该技术可以将原来需要18周的测试时间缩短到1个月。
8·Test specimens shall be taken after all non-destructive testing (NDT) has been carried out and which has passed the relevant inspection criteria for the NDT method(s) used.
试样的截取应在所有非破坏性试验(NDT)已经完成并已经通过所用NDT方法的相关检查依据后进行。
9·There are non-destructive testing equipment testing equipment 9, 18 physical and chemical test equipment.
检测设备有无损探伤设备9台,理化试验设备18台。
10·Analyzes the method of auto balance, parameter calculation, hardware circuit and software flow chart of electric bridge of NDP in the non -destructive testing of EED.
分析了NDP在电火工品无损检测中电桥自动调平衡的方法、参数计算及硬件电路和软件流程图。