1·Every connection that you make to the network is stamped with your IP address.
你跟网络的每一个连接都标有你的互联网协议地址。
—— 《柯林斯英汉双解大词典》
2·As you can see, the NAT router stores the IP address and port number of each computer in the address translation table.
正如你所见， NAT 路由器将每台计算机的 IP 地址和端口号都存储在地址转换表中。
3·If it has its own IP address, we can use the access point itself over the network; this is less secure, but more fun to use for a demo.
如果它有自己的 IP 地址，那么我们就可以在网络上使用接入点本身了；这样做的安全性要差一些，但在用于演示方面会更有趣。
4·Any fully specified IP address.
任何完全指定的IP地址。
5·IP address: 192.168.128.102.
IP地址：192.168.128.102。
6·IP Address: 128.209.67.55.
IP地址：128.209.67.55。
7·IP Address: 128.209.61.76.
IP地址：128.209.61.76。
8·IP Address: 128.209.61.75.
IP地址：128.209.61.75。
9·IP Address: 128.209.67.54.
IP地址：128.209.67.54。
10·Notice the: 1 after the IP address.
注意IP地址后面的：1。
1·Implementation of scheme depicted in Table 1, and an unsupported sample Perl script used when setting BMC firmware IP address.
示例概念文件和BMC ip地址perl脚本1 es - linuxclusterintro . zip 3 KB HTTP方案的实现如表1所示，在设置BMC固件ip地址时使用并不受支持的示例perl脚本。
2·When you make the switch from one environment to another-and therefore from one IP address to another-people who have the DNS entry cached will continue to try to use the old environment.
当您从一个环境切换到另一个环境时—因此也是从一个IP地址切换到另一个IP地址—缓存了这个DNS条目的人将继续尝试使用原来的环境。
3·The host name or IP address that you specify is what other nodes will use to communicate with the node being created.
您指定的主机名称或 IP 地址就是其他节点将用于与正在创建的节点通信的主机名称或 IP地址。
4·The script is useful in case you need to replace one IP address with another in all your system files — for instance, if your default router has changed.
倘若您要在您所有系统文件中对一个IP地址用另一个IP地址替代(例如，如果您缺省的路由器已更改了)，则该脚本很有用。
5·As shown in Figure 1, the external clients send traffic to a single IP address, which may exist on any of the LVS director machines.
如图1所示，外部客户机向单个ip地址发送通信量，而该IP地址可能存在于某个LVS控制器机器上。