1·Electromotor ventilation section shape is similar to the I beam and H beam.
电机通风用异形钢材是一种机械零件，其断面形状类似工字钢和H型钢。
2·The box-column and H beam joint is commonly used in steel frame structures.
柱 与H型钢梁刚性连接节点是钢框架结构中最常见的节点形式之一。
3·H beam specifications query system, VPF production, curriculum design, contains a complete curriculum design report. Completely original.
说明：H型钢规格查询系统，VPF制作，课程设计用的，包含完整的课程设计报告。完全原创。
4·The paper founded rolling model of H beam through developing MARC software. On unchanging web reduction, stress and strain change because flange reduction are different.
应用MARC软件并对其进行二次开发， 建立了H 型钢轧制模型， 在腹板相对压下量不变条件下研究了翼缘不同的压下量对轧制过程中应力应变的影响。
5·This article introduces the mix program and process flow of H beam production at Laiwu Iron and Steel Group Co. , Ltd. , and analyzes the main technical features of its process and equipment.
介绍了莱钢H型钢生产线的产品方案及生产工艺流程，分析了其生产工艺和主要设备技术特点。
6·I also read Dickson, Heinlein, and H. Beam Piper, and a lot of Andre Norton.
我还阅读迪克逊、海因莱因和H .比姆·皮普的作品，还有许多安德鲁·诺顿的书。
7·A vertical stiffening rib joint is suitable for rectangular steel tube column with smaller section to H-beam connection.
垂直加劲肋节点适用于柱截面较小的方钢管(矩形管)柱和H型钢梁节点。
8·The distribution of the rolling pressure on H-beam is a very important problem.
h型钢的轧制压力分布是研究人员非常关心的问题。
9·Resulted from bending test of the beam composed by H-shaped steel and cement-soil, the mechanics characteristic and the mode of failure are analyzed.
在H型钢—水泥土组合梁抗弯试验中，分析组合梁的受力过程和破坏模式；
10·The Single Input and Single Output(SISO)modal experiment and numerical simulation was used to study the dynamic behavior of a CFST column-H steel beam frame structure model.
方法利用单输入单输出（SISO）模态试验方法和数值模拟方法，对一榀钢管混凝土柱-H钢梁框架结构模型的动力特性进行测试分析。