1·M8JR使用的铝合金7075中心轴驱动器，以完成这项工作。
The M8JR USES Aluminum 7075 center driver shaft to get the job done.
2·原始块的7075铝合金开始在重六点三二磅。
The raw block of 7075 aluminum started out at a weight of 6.32 pounds.
3·一些最轻的框架可用(与复合材料的除外)从保税7075 - T6的提出铝。
Some of the lightest frames available (with the exception of Composites) are made from bonded 7075-t6 aluminum.
4·虽然7075 - T 6铝合金具有重量比，它的强度高得多确实有一定的打击比6061至T6高的趋势。
Although the 7075-t6 aluminum has a much higher strength to weight ratio, it does have a higher tendency of cracking than 6061 T6.
5·基于实验研究探讨了深冷处理数值模拟所需的7075铝合金材料的物性参数。
Some property parameters of 7075 aluminum alloy were investigated upon experimentation for the numerical simulation of cryogenic treatment.
6·7075由美铝公司在1943年推出，在航空航天工业，7075至今一直是7xxx系列合金的主力力量。
Alloy 7075 is Introduced by Alcoa in 1943, alloy 7075 has been the standard workhorse 7xxx series alloy within the aerospace industry ever since.
7·通过淬火可以获得高强度、高韧性的铝合金，同时淬火后分布于毛坯中的残余应力幅值很大。
Although the strength and toughness of aluminum alloy 7075 can be increased greatly by quenching, this process will result in large magnitude of residual stress.
8·试验结果表明，外加阳极极化和阴极极化都能增加7075铝合金的应力腐蚀敏感性，即使在弱极化情况下也能显著增加合金的应力腐蚀敏感性。
The experimental results show that the SCC susceptibility of 7075 aluminum alloy would increase in anodic or cathodic polarization, even under a weak polarization.
9·本文研究工业纯铝中含RE（混合轻稀土，含量为0～0.275％）时对7075合金组织和性能的影响。
The effects of RE (mixed light RE, 0—0.275%) content in commercial pure aluminium on the structure and characteristics of 7075 alloy are investigated in this paper.
10·针对7075铝合金中厚板真空电子束焊接过程，采用非线性有限元法，对焊接接头的残余应力分布进行了数值模拟。
Aim at 7075 aluminium alloy vacuum electronic beam welding, using nonlinear finite element, the numerical simulation of the residual stresses distribution in welding joint was made.