winding

1·Besides, this software also provides the function to learn basic knowledge on electric motor winding.

此外，本软件还为使用者提供了学习有关电机绕组基本知识的功能。

2·Submersible pumps do not work into the mud, or would result in poor motor cooling motor winding burn.

潜水泵工作时不要沉入泥中，否则会导致电机散热不良而烧坏电机绕组。

3·The formulation design, processing characteristic and material choice of winding without filling in epoxy resin cast dry-type transformer are introduced. The warnings in cast process are presented.

介绍了环氧树脂浇注干式变压器无填料绕组浇注的工艺特点、材料的选择和配方设计，提出了浇注过程中应注意的事项。

4·Applied for apparatus, watch winding.

适用于仪表、手表绕组。

5·Make preparation of winding temperature indicator for site calibration.

绕组温度指示器做好进行现场校准的准备。

1·It's as if you were winding sewing thread on a spool.

这就像你在把线缠绕到一个线轴上去。

2·There were no Windows in this part of the winding corridor, only tapestries.

在这缠绕的走廊里，这一段路没有窗户，只有一些挂毯。

3·As the transmission medium contains easy winding or bunching of the fiber material.

由于被输送的介质中含有易缠绕或聚束的纤维物。

4·When the coils come off the winding machine, they are fairly loose, and delicate.

当线圈脱落的缠绕机，它们是相当松散的，而微妙的。

5·The importance of winding tension control to increase the developed fiber strength is discussed.

讨论了缠绕张力控制对提高纤维发挥强度的重要性。

1·Applying transfer matrix method to the complex rotor system, the critical speed and the vibrating model of a high - speed spinning winding chuck are analyzed.

将传递矩阵法应用于结构复杂的复合转子系统，对高速纺丝卷绕夹头的临界速度及其振型进行了理论推导与计算。

2·The main parameters of viscosity, spinning temperature, pressure and winding velocity for coal tar pitch fluid should be rigidly controlled during spinning.

在纺丝过程中，要严格控制煤沥青熔体的粘度、纺丝温度、压力、卷绕速度等主要参数。

3·The electrode assembly is formed by winding the first and second electrode plates and the separator.

电极组件通过卷绕第一和第二电极板以及隔板形成。

4·The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.

建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。

5·Five, cut off the body: the cutting mechanism is winding forming, cut off the wire is the last of the spring drop of the processing action, cutting through the knife and the core to complete.

切断机构：切断机构是卷绕成形后，切断钢丝是弹簧落下的最后一个加工动作，切断时通过刀和芯来完成。

1·For such a low frequency, which would only be resorted to when it is indispensable for the operation of ordinary motors, I would use a secondary winding wound from a wire 50 miles in length.

对于如此低的频率，它将只有是依靠于当它对普通马达运行时不可缺少，我将使用一个次级线圈创伤自一根50英里长的线。

2·Conventional methods are more and more difficult to adjust the modern ship degaussing system due to degaussing winding Numbers being increased continually in it.

在现代舰船消磁系统中，消磁线圈数目不断增加，已经难以用常规方法进行调整。

3·The belt sheave, stator winding and rectifier of the vehicle alternator have a rather higher breakdown rate. Therefore, this paper gave out their solutions to extend the alternator life.

汽车用交流发电机的皮带轮、定子线圈、整流器的故障率相对较高，本文给出了其故障的处理对策，以延长其使用寿命。

4·The propagation process of pulse wave in the cable and influence of cable length on overvoltage and wavefront time of winding are discussed in this paper.

讨论了脉冲波在电缆中的传播过程以及电缆长度对线圈端的过电压和脉冲上升时间的影响。

5·In the separately excited dc machine, the field winding is excited from a separate source.

对于它励直流电动机，励磁线圈由一个单独的电源来励磁。

1·The first step in yarn preparation for both weaving and knitting is winding.

在机织和针织生产中，纱线准备的第一个工序是络纱。

2·During the produce of the sweater, the winding tension and waxing will have a remarkable effect on fabric quality.

在毛衫生产中，络纱张力和上蜡工艺对纱线准备的影响尤其显著。

3·This is very important to ensure constant linear density of assembled roving in its winding process and reduce the labor intensity of operators.

对确保合股无捻粗纱络纱过程线密度稳定及减轻工人劳动强度有重要意义。

1·The paper introduces that one refitted track-type welding automobile, with its comprehensive function such as power supply, simple crane and winding, solves problems in construction.

叙述了经改装、配备的履带式焊接车，其具备供电、简易吊装、卷扬等多种功能，从而解决了一系列施工问题。

2·On the basis of original screw type, winding type and hydraulic type Headstock, a kind of dentate annul headstock is designed and manufactured.

在原有螺杆式、卷扬式和液压式启闭机的基础上，设计研制了齿销式启闭机。

1·The convention is that a strip's first triangle defines its winding.

按惯例，由三角形带中的第一个三角形定义其环绕。

2·An application fills the interior of a path using one of two fill modes: alternate or winding.

应用程序使用以下两个填充模式之一填充路径的内部：交替或环绕。

1·ZWZ the first set of specifications for export to Europe of a turntable bearing hair to the user, applied to submarine cable winding machinery.

瓦轴集团第一套出口欧洲某规格转盘轴承发往用户，应用于海底电缆缠卷机械。