1·Weft insertion: shuttle single-weft insertion.
引纬机构:采用梭子单纬引纬。
2·New weft insertion, new frame structure and high speed CPU, ensure the running speed maximum 1200rpm.
由于采用了新型的投纬装置、新型墙板构造。CPU处理速度的高速化等,机台最高可在1200 r pm下运行。
3·To reduce loom stop caused by weft insertion is an important project in improving weaving efficiency of air jet loom.
降低纬向停台是提高喷气织机效率的重要课题。
4·By the analysis of the influence of weft insertion elements such as prewinder, main nozzle, relaynozzle, profile reed, valve, etc.
本文分析了储纬器、主喷嘴、接力喷嘴、异形筘、阀门等引纬元件对流场设计的影响;
5·This article analyses the movement principle and regulation of the weft insertion of rapier loom model G1731, and discusses its adjustment.
分析了G1731型剑杆织机引纬机构的原理及运动规律,探讨了剑杆织机引纬机构的调整方法。
6·This paper introduces the construction of weft insertion motion of rapier loom G1613, and analyses the movement regulation of weft insertion and battening.
介绍了G 1613型剑杆织机引纬系统的组成,对引纬系统的引纬和打纬等机构的运动规律进行了分析与讨论。
7·This reduction in the number of degrees of the pick cycle available for weft insertion is acceptable because the weft carrier does not have as far to travel as in the wider mechanisms.
这种减少引纬所占引纬循环角度的做法是可行的,因为载纬器不必像在较宽织机上那样穿行较长的距离。
8·Early opening and later weft insertion were adopted in weaving, adjusting of leno selvage and waste selvage yarn can reduce weaving defects and make weaving efficiency reach above 82%.
织造过程中采用早开口,迟引纬,调整绞边及废边纱穿法,有效解决了织造疵点,使织造效率达到82%以上。
9·According to the characteristics of warp knit fabrics, open and close loop models as well as fall-plate and weft insertion models of multi-bar that accords with actual loops were set up.
根据经编织物组织的特点,提出符合实际线圈的经编基本组织的开口和闭口模型以及多梳经编织物的压纱和衬纬模型。
10·We analyze the main technical parameter of THEMA rapier loom with the data processed by computer by testing shedding mechanism and weft insertion mechanism with mechanical dynamic tester.
运用机械动态参数测试仪,通过对THEMA剑杆织机的开口、引纬机构进行动态测试,利用计算机处理有关测试数据,分析和讨论了该机的主要技术参数。