universal joints

[机] 万向节
常用释义
[机] 万向节

例句

1·Most cars have two universal joints, one at each end of the propeller shaft.

多数 汽车采用两个万向节,在传动轴的每一端各有一个万向节。

2·Oil feet of universal joints, stay, joint, car row oil absorption multiple tube.

量油尺,万向接头,呆接头,汽车排吸油复合管。

3·There must be one or more universal joints to permit variations in the angle of drive.

一个或几个万向节来适应传动角度的变化;

4·Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.

进入变速箱,万向节连接中心传动轴到内部锥齿轮。

5·The two-section propeller is supported by a center bearing and coupled together by universal joints.

两段传动轴之间有一个中间支承轴承,并由万向节连接。

6·Drive shaft a drive shaft and universal joints connect the transmission to the rear drive axle on most rear-wheel-drive vehicles.

传动轴在大多数后轮驱动的车辆中主要是靠传动轴和万向节连结着变速箱与后轮驱动桥。

7·Universal joint balancing machine: coupling drive is the use of universal joints will balance the spindle and the rotor connected.

万向节平衡机:联轴器拖动是利用万向节将平衡机主轴与转子相联接。

8·The conclusions and the analytical methods offered a significant guidance to the design, manufacturing and assembly of universal joints.

本方法和结论可供工程技术人员设计、制造、装配及调试双万向铰链机构时参考。

9·The truck pivots on a ball thrust race (slightly preloaded) with limit stops to prevent damage to the universal joints etc in the case of a derailment.

在推力球比赛的极限(略预装)卡车支点站,以防止损坏万向节的一出轨案等。

10·The drive shaft is able to contract, expand, and change operating angles while transmitting torque through the use of universal joints and slip joints.

在万象头和伸缩接头的应用下,传动轴还能进行收缩,伸展或改变运行角度等方式来传递扭矩。

同义词