1·Then the torsion bar spring according to the optimal match is design.
再由最优匹配刚度值设计出相应刚度的扭杆弹簧。
2·Remanufacturing test on a torsion bar shows that the system is feasible.
对某车辆的扭力轴进行了试验验证，结果表明该系统是可行的。
3·Features of the design that can be controlled (e. g... Torsion bar rate).
控制因素可以控制的设计特性(例如…扭杆比率)。
4·The drive system is comprised of at least one balance shaft and a torsion bar.
该驱动系统包括至少一个平衡轴和一个扭力杆。
5·Mechanical stop and steel torsion bar to maintain synchronization and high precision.
机械挡块，扭轴同步，精度高。
6·The slide block is synchronized with anti torsion bar and mechanical block mechanism. ;
滑块同步采用抗扭连杆和机械挡块机构；
7·The fatigue failure has been considered as torsion bar spring are subject to periodic forces.
由于扭杆受到的是循环应力，因此设计时考虑了疲劳失效问题；
8·The side-rolling resistant torsion bar made of this steel exhibits high fatigue life span and elastic limit.
采用该材料制造的抗侧滚扭杆具有高的疲劳寿命和高的弹性极限。
9·The compact torsion bar suspension is one of important suspension structure types applied in popular passenger cars.
紧凑型扭杆弹簧悬架是普及型轿车中采用的一种主要的悬架结构形式。
10·Oxygen content is the most important metallurgical factor that affects the materials properties of torsion bar in the looms.
冶金质量影响纺织机扭轴材料的性能，而其中氧含量是不可忽视的因素。