1·They are thermal expansion, vaporization and dielectric breakdown.
它们是热膨胀、汽化和介质击穿。
2·Accuracy: dimensional stability, low mold shrinkage, low thermal expansion rate.
精确度:尺寸稳定性极佳,模塑收缩率低,热膨胀率低。
3·By adjusting these two parameters, can be near zero coefficient of thermal expansion.
通过调整这两个参数,可以获得接近零的热膨胀系数。
4·External balanced thermal expansion valve works is based on the basis of force balance.
外平衡势热力膨帐阀的工作原理是建立在力平衡的基础上。
5·The thermal expansion coefficient DTA and electrical properties were also investigated.
性能测试包括热膨胀系数、差热曲线和电性能等。
6·Flexible thermal expansion molding is a new low-cost manufacturing technique of composite.
软模热膨胀法是制造复合材料的一种新型廉价成型方法。
7·To determine if this is the result of thermal expansion, try briefly opening the cold water tap.
为了确定是否是热膨胀引起的,可以短暂开启冷水龙头进行测试。
8·From this reason the creep strain and the thermal expansion can be separately examined and added.
由于这两个性质,蠕应变和热应变可分开研究,而且可线性叠加。
9·A pressure relief valve must be installed as shown to prevent excess pressure by thermal expansion.
必须按照图示安装压力安全阀,以防止由于热膨胀产生的过高压力。
10·Heating stretching pipe hanger should be fixed oppositely to the direction of the thermal expansion.
有热伸长的管道吊杆,应向热膨胀的反方向偏移。