1·The resistance to solvent and resistance to thermal distortion of TPV were determined.
测定了TPV的耐溶剂性能和耐热变形性能。
2·So accurate temperature field and thermal distortion field analysis is the key to resolve these problems.
对于输出窗准确的温度场和热形变场研究是解决热透镜效应的关键。
3·In this paper, we study thermal distortion of the laser crystal by the theory of elasticity and numerical method.
本文通过理论分析与数值计算，对板条状激光晶体热变形进行了详细的研究。
4·Finally the system error was analyzed and its effect was calculated to the measuring result of thermal distortion.
最后分析了系统误差，并计算了系统误差对热变形测量结果的影响。
5·This virtual prototype can let us thoroughly understand the thermodynamic mechanism of machine tool's thermal distortion.
导轨的热阻虚拟样机能够让我们深入理解导轨热变形的热力学机理。
6·This paper analyzes the tendency of the PCB thermal distortion, and gives the method for the dynamic thermal compensation.
本文通过分析，探讨了电路板热变形的趋势，并得出了热变形动态补偿的方法。
7·Numerically analyze the thermal distortion of slab laser crystal. And compare the result with the result from physics theory.
采用数值计算方法分析板条状激光晶体的热变形，并与物理方法所得结果进行比较。
8·Thermal distortion of phosphate and silicate glasses induced by single pulsed xenon-flash lamp in different condensers are investigated.
研究了处于两种不同聚光器中的磷酸盐和硅酸盐玻璃棒在单次脉冲氙灯光作用下产生的热畸变。
9·After expounding the modeling method of multiple linear regression based on least square algorithm, the thermal distortion model is modelled.
在介绍了基于最小二乘法的多元线性回归建模方法后，建模了机床的热变形实时预测模型。
10·Aiming at the lost accuracy happened in HEL (hot embossing lithography) because of thermal distortion, room-temperature imprint lithography is proposed.
针对热压印光刻工艺中因热变形而导致精度丧失的问题，提出了冷压印光刻。