1·AIM: To establish a model of polymer surface wettability by oxygen plasma treatment.
目的：利用低温等离子体轰击法建立高分子聚合体表面润湿性研究模型。
2·Conclusion the plasma treatment can be used to promote the surface wettability of denture base acrylic resin.
结论低温等离子体表面处理技术可用于提高树脂材料表面润湿性。
3·The results showed that the surface of borate whisker was attached to the modifier, and its surface wettability was changed.
结果表明，改性剂附着在硼酸镁晶须的表面，硼酸镁晶须的表面润湿性发生改变。
4·Many inessential factors are becoming more important, such as the viscous dissipation, axial conduction and surface wettability.
许多在常规尺度下不重要的因素如黏性耗散、轴向热传导和表面浸润性等都开始变的突出。
5·The changes of fiber surface wettability and surface groups were determined by dynamic wettability test equipment and IR spectrum.
首次采用浸润性测试和IR测试分析等离子体处理前后纤维浸润性和表面官能团的变化。
6·Conclusion: Low temperature plasma treatment might be used to improve the surface wettability and bonding strength of denture base acrylic resin.
结论：低温等离子体处理树脂材料表面可提高其润湿性及粘接性。
7·Surface wettability study of two carbonate reservoir rocks of Chuanzhong and Renqiu oil fields by means of measuring contact angles are described in this paper.
本文记述了用测接触角法研究两个储层基质渗透率极低的碳酸盐岩油藏岩石表面润湿性的方法。
8·Based on polymer surface modification and roughening method, the surface wettability of PP improved significantly. Film-forming ratio increased from about 40% to 95%.
本文利用聚合物表面改性和表面粗糙方法，大幅改善了PP表面的润湿性，成膜率从约40%提高到约95%。
9·The influences of hydrophobic group content on the stability of the silica sols and the surface wettability and vapour stability of the silica membranes were investigated.
研究了憎水基团的添加量对溶胶体系的稳定性和对二氧化硅膜润湿性以及水汽稳定性的影响。
10·In order to improve the surface wettability of wheat straw and increase its bonding strength with adhesives, an aqueous alkali was used to modify the surface characteristics.
采用碱溶液对麦秸原料进行处理，以期改善其表面润湿性，提高与胶黏剂的结合强度。