1·Strain fatigue and stress fatigue are related by the influence coefficient of strain distribution.
通过应变分布影响系数把应变疲劳与应力疲劳联系起来。
2·The feature of strain distribution in a typical deep drawn part JD90 motorcycle tank was analyzed.
分析了典型实物拉深零件JD90型摩托车油箱的应变分布特点；
3·It determined that the model of strain distribution on the flange of frame can be expressed as a plane.
确定框架法兰的应变分布可以用平面模型表示。
4·AIM: To determine the stress and strain distribution of femur under impact force during human gait cycle.
目的：考察人体步态运动过程中冲击载荷作用时的应力和变形分布。
5·The deformed 3-d Moire fringe patterns are analyzed, and the deformed strain distribution patterns are obtained.
对变形三维云纹图进行了分析，得出了三维应变分布图。
6·Commonly, ultrasound elastography can only obtain the axial strain distribution of tissues with an external compression.
摘要超声弹性成像通常只能得到组织在外部压缩作用下的纵向应变分布。
7·The impact of film size on the strain distribution is investigated, and the intuitive and reliable results are attained.
探讨了应变膜尺寸对应力差分布的影响，得到了直观可靠的结果。
8·The grid experimental method to determine principal plastic strain distribution of auto-panel stamped parts is discussed.
研究了用网格试验方法对冲压成形后覆盖件的塑性主应变分布进行测量的方法。
9·Secondly, the model of deck pavement is analyzed by finite element software ANSYS to get its stress and strain distribution.
其次，本文使用ANSYS通用有限元策略对桥面铺装模型进行浅析浅析并得出它们的应力应变分布。
10·Comparison of four different combinations of the same time, the stress and strain distribution, the size of the plastic zone.
同时对比了在四种不同组合时，应力、应变的分布，塑性区范围的大小。