soft segment

软链段:指在高分子链上具有较高柔性的链段。
常用释义
软链段:指在高分子链上具有较高柔性的链段。

例句

1·Otherwise, phase separation degree of WPU film from different soft segment content was discussed.

另外还研究了不同软段含量的聚氨酯材料在微相分离程度的差异。

2·The effect of molecular weight and content of PEG in soft segment on morphology and properties of TPU was studied.

研究了聚乙二醇分子量和含量对TPU 的结构和性能的影响,提出了在TPU 软段中引入PEG可以改善其与硝酸酯的混溶能力。

3·The polyether-based PUU shows the better phase separation than polyester-based with the same molecular weight of soft segment.

在软链段分子量相同时,聚醚为基础的PUU的相分离程度较聚酯为基础的PUU高。

4·The results showed that increase hard segment content, soft segment sequence length and ionic group to be favourable for rising tensile strength.

研究表明:硬链段含量、软链段链长的提高和离子基团的增加均有利于拉伸强度的提高。

5·A polyurethane coating agent with crystalline soft segment was synthesized through the adjustment of polyurethane composition and proportionality.

通过调节聚氨酯合成配方组成及其比例,制备了具有结晶性软段的聚氨酯涂层剂。

6·W. 1228 were made by DSC. Further, thermal changes of soft segment crystalline of these materials at different annealing conditions were also investigated.

两系列嵌段聚酯型聚脲氨酯(PUU)弹性体,并考察了这些材料在不同退火条件下软段结晶的热变化。

7·The effects of synthetic method, components of soft segment and hard segment, post cure on the mechanical properties of polyurethane elastomers were studied.

研究了合成方法、软段及硬段组成结构、熟化条件等因素对聚氨酯弹性体力学性能的影响。

8·It was found that the high crystallinity of the soft segment regions and the formation of hard segment domains are the necessary conditions for polyurethanes with good shape memory behavior.

通过DSC、弯曲实验和力学实验,研究了形状记忆聚氨酯的性能,发现软段高度结晶和硬段聚集形成硬段微区是其具有较好形状记忆性能的必要条件。

9·The monitoring design has been discussed in detail about soft soil embankment ( segment K54+350~K54+560 , Guang -Zhao expressway ) which is treated by jointed vacuum-preloading method .

详细介绍了广肇高速公路K54+350~K54+560段软弱路基的工程地质特征及真空联合堆载预压位移监测布设。

10·The device is comprised of a protected stainless steel cannula for puncturing the segment, a soft plastic body for holding the cell suspension, and a spout for dispensing calibrated drops.

该装置是由一个受保护的不锈钢套管穿刺段,一个用于支撑悬浮细胞的柔软塑料机壳以及分配校准液滴的喷嘴。