1·And the unconformable contaet face is lower sliding surface.
而不整合面为低滑面。
2·The existence of the sliding model is analyzed along the sliding surface.
分析了切换流形上其滑动模态区的存在性。
3·The parameters of sliding surface and controller can be solved through LMIS.
并且通过求解线性矩阵不等式来设计切换面和控制器。
4·Under the following assumptions which include:(1)The sliding surface is rotational ellipsoid;
基于以下假定条件:(1)滑动面为旋转椭球体;
5·The sufficient condition for the existence of stable sliding surface was derived in terms of LMIs.
给出了线性矩阵不等式形式的稳定滑动模面存在的充分条件。
6·The critical sliding field technology was used to probe the sliding surface of a waste-dump slope.
应用临界滑移场技术,对排土场边坡进行临界滑动面搜寻。
7·Engagement between the spring arms and the sliding surface creates a lifting force which opens the valve.
该弹簧臂与所述滑动表面之间的接合产生了开启所述阀的上举力。
8·Deep displacement monitoring showed that there was a clear sliding surface in the middle part of landslide.
深部位移监测表明滑坡体中上部已经形成一个十分明显的滑面。
9·The authors assume that the heat flux at the sliding surface of the lip occurs for the second boundary condition.
将唇口滑动而上的传热归结为第二类边界条件;
10·In this paper, a new method to determine sliding surface in terms fo the slope of the displacement curve is suggested.
在本文,笔者根据位移斜率提出了一种确定滑坡滑动面的新方法。