1·Single shrink wrap packaging to avoid scratching.
单个热收缩膜包装,避免挂花。
2·Shrink Wrapping: Projecting a mesh using the Shrink Wrap Deformer.
收缩包裹:使用收缩包裹变形器投影网格。
3·Double safety sealed, with outer shrink wrap film and inner bottle freshness seal.
双安全密封,收缩包装膜外及内瓶新鲜印章。
4·The lid is an aluminium-covered cork bung, over-covered with a tamper-evident shrink wrap.
盖子是铝覆盖软木邦,过覆盖篡改明显收缩包装。
5·Now slide your shrink wrap in place and warm it with a heat gun for a positive weather seal.
现在可以把收缩管滑动到这个位置,用热风加热以达到一个有效的密封。
6·For drinks, beer, mineral water, cans, glass bottles and other non-pallet shrink wrap collection.
适用于饮料、啤酒、矿泉水、易拉罐、玻璃瓶等无底托集合的收缩包装。
7·Move the shrink wrap well away from the splice area, then interweave or tie a mechanically strong splice.
先移动收缩管远离接头区域,然后把绞接处线束交织或打结成机械强度足够大的接头。
8·For a splice, start by removing a sufficient amount of insulation and sliding a piece of shrink wrap onto the wires to be soldered.
对于一个绞接处接头,从移开足够的绝缘开始,再滑移一件热收缩管装到需焊接的线束上。
9·When it's cold out, cover your Windows with plastic and shrink-wrap them by using a hairdryer to heat the plastic at its edges.
当室外寒冷时,用塑料布和收缩膜遮起来,用吹风机在四周把塑料吹热。
10·The just-out-of-shrink-wrap program that you're using (and spent a lot of money on) to propel your development efforts forward as much as possible, as quickly as possible.
新买来的产品(花费了大量的资金)可以尽可能多,尽可能快地向前推进你的开发项目。