1·When polymer solution concentration is above CAC, the characteristics of shearing thinning and shearing resistance exhibited.
在浓度高于CAC以上，其溶液具有很好的抗剪切性和剪切恢复特性。
2·Increasing the arch thrust augments the shear stress on the surface of the shearing resistance part, which counteracts the influence of the crushed rock.
同时由于拱向应力的增大，即增大了抗剪面剪应力，抵消了坝体下游破碎岩石的影响。
3·Compared with the prior art, the invention has the advantage of high drawing and shearing resistance of riveting, good stability, long weighted time, and the like.
与现有技术相比，本发明具有铆接的抗拉、抗剪强度大，稳定性好，受力时间长等优点。
4·The discriminant condition avoiding the baroclinic destruction and the method to calculate the shearing resistance are given from the mechanics of shearing resistance and the type of shear failure.
讨论 外节点 的抗剪机理及节点 的受剪破坏形式，提出了节点 斜压破坏 的抗剪承载力计算方法。
5·Moreover, the LS-DYNA solver was adopted to investigate the tensile and shearing resistance capacity of the embedded part in curtain wall, and comparison with the experimental results was also made.
利用LS - DYNA求解器进行计算，考察了幕墙预埋件的抗拉承载力和抗剪承载力，并与试验结果进行比较。
6·Hydrophobically associating polymer solution has special shearing resistance performance because of introduced associating base group, so there is a wide application prospect in oil gas exploitation.
疏水缔合聚合物分子链上疏水基团的引入使其溶液具有独特的抗剪切性能，从而在油气田开采领域具有广阔的应用前景。
7·But the viscosity and viscoelasticity of ultra high molecular weight polyacrylamide decrease significantly. The ability of establishing flow resistance of polyacrylamide is limited after shearing.
而超高分子量聚丙烯酰胺经剪切后粘度和粘弹性显著下降，建立流动阻力的能力有限。
8·The result showed that the dynamic analysis method is effective in practice to determining the resistance to shearing of slipping plane of rock mass slope.
结果表明，反分析方法是获得岩体斜坡滑动面抗剪强度的最经济、合理的途径。
9·The mean unit force of friction to a great degree depends on shearing of pressure welding bridges and conquering of ploughing resistance.
平均单位摩擦力基本上取决于切断压力焊接桥和克服耕犁阻力。
10·Shear Springs are built on the diagonals of quad faces and provide some resistance to shearing forces in the cloth.
剪变弹簧，四边形面的对角线重合。提供抵抗布料剪切变形的力。