1·The stainless steel seat ring is manufactured with a slight inside taper.
不锈钢阀座密封环制成内部锥度。
2·Disc– machined seating surface is mated to seat ring for positive shutoff.
阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
3·Disc? Machined seating surface is mated to seat ring for positive shutoff.
阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
4·Special extra width, monel seat ring allows for wear without loss of seal.
特别超宽蒙乃尔密封环，经得起磨损而不会丧失密封性能。
5·Disc– machined seating surface is mated to seat ring for positive shutoff.
倒棱增加物的塑造在自动制冷管的范围内、头螺栓的座套表面。
6·Seat ring is progressively crimped on a lathe to imprison the O-ring in it.
在机床上，阀座密封环逐渐起波纹，并将O形环束缚在里面。
7·By removing the h, the trim can be specified with a seat ring facing equal to the other trim parts.
如果去掉h，则这个阀内件就可以指定为与其它阀内件相等的阀座环表面。
8·The bottom of the disc is guided by the body seat ring for maximum disc stability in throttling applications.
阀瓣底部由阀体阀座环引导，最大限度提高阀瓣在节流应用中的稳定性。
9·There is adjusting disc in the valve. Change the distance between disc and seat ring can change the blowing pressure.
吹灰器的阀门内装有调整盘，改变调整盘与阀阀座环的间隙，可以改变吹灰介质的工作压力。请在吹灰之前现场调节。
10·Discussing several ordinary processing technologies of valve seat ring and valve stem guide hole of cylinder head now.
对目前气缸盖气门座圈和导管孔的几种一般加工工艺进行讨论。