1·The inter-stand tension can be changed by adjusting the roll gap or the roll speed.
利用动态连轧理论分析了辊速和辊缝对出口厚度和张力的影响。
2·In the event of a stall, immediately open the roll gap and turn off the cooling water.
在轧机发生事故时，应快速打开轧辊间隔，关掉冷却水，去掉辊身上卷曲的带钢。
3·The features of roll gap in different cross schemes of roller arrangement were studied.
对不同轧辊交叉方式的辊缝特性进行了研究。
4·On the theoretical basis, the compressing roll gap was increased and buckling was reduced.
在理论分析的基础上，提高了压紧辊的间隙，减少了失稳弯曲。
5·Plastic deformation is easy to occur on the surfaces of plate and strip in the roll gap of pinch mill.
在板带递送机辊缝变形区中，板带表面容易发生塑性变形。
6·Not all rolling incidents such as stickers or stalls and wrong setting of the roll gap must necessarily lead to severe damage.
事故的发生，如粘接、卡带或辊缝间隙设计不当不一定都会引发轧辊的损坏，事故之后对轧辊正确处理非常重要。
7·The differential equations of continuous rolling tension and roll gap are the essential conditions. This comprehensive and integrated -rolling model comb…
连轧张力差分方程和辊缝差分方程是实现分离控制的必要条件，综合集成轧钢模型将人工智能和数学模型融于一体。
8·This paper introduces the controlling method to do roll gap regulation used of ABB MASTER system on medium small section mill of Laiwu iron and steel group co.
介绍了莱钢中小型轧钢车间轧机采用ABB MASTER系统进行辊缝调整的控制方法。
9·Combined with practical situation, the model accuracy was verified, further the model calculation can lay solid foundations for online calculation of roll gap.
结合现场实际，验证了模型的准确性，为在线计算出口辊缝提供了思路和依据。
10·This paper introduces the operation principle of the author developed equipment for measuring roll gap and ellipticity of the guide roller in continuous caster.
文中介绍了作者研制的连铸导辊辊缝和椭圆度测量装置的工作原理及测头结构。