1·Contact heating is caused by I2R power dissipation.
接触发热是由于I2R功耗引起的。
2·The maximum output current is limited by power dissipation.
最大输出电流受到额定功耗的限制。
3·The design scheme of CAN bus instrument in exceed low power dissipation is introduced.
介绍了CAN总线仪表在超低功耗时的设计方案。
4·Its power dissipation and propagation delay time are a tradeoff of the two comparators.
其功耗和传输延迟时间介于两种比较器之间。
5·Features: high DC current gain, low saturation voltage, high col lector power dissipation.
特点：高直流电增益，饱和压降低，高集电极。
6·As a computers processing performance continues to increase, so does its power dissipation.
随着计算机处理器性能的不断提高，功耗也在不断增加。
7·A differential pair dynamic comparator which has no DC power dissipation is used in SUB-ADC.
每级子模块中采用了没有直流功耗的差分对动态比较器，具有更好的综合性能。
8·The power dissipation model of synchronous rectification flyback converters was established.
建立了同步整流反激变换器的损耗模型。
9·The optimal design rule of CLA was inducted from power dissipation and area constraint, reflect.
并与功耗、面积约束一起，归纳出超前进位加法器的优化设计规则。
10·HT1625 has the characteristics of low power dissipation choice, simple connection and audio output.
HT1625具有低功耗选择，接线简单和音频输出等特点。