1·Pneumatic cushion cylinder is the most common actuator in pneumatic transmission systems.
缓冲气缸是气压传动系统中最常用的一种执行元件。
2·In this article, a new type of pneumatic transmission CAD system based on Internet was developed.
开发了基于国际互联网的气压传动CAD系统。
3·ZUO Jianmin. Hydraulic and Pneumatic Transmission[M]. Beijing: Machinery Industry Publisher, 2001.
左健民。 液压与气压传动[M]。 北京： 机械工业出版社， 2001。
4·Hydraulic and pneumatic transmission test system which controlled by PLC and Relay are in this lab.
本实验室配备PLC和继电器控制的透明液压传动实验台和气动实验台。
5·ZHANG Yi. Hydraulic and Pneumatic Transmission [m]. Beijing: Publishing House of Electronics Industry, 2011.
[1]张奕。液压与气压传动[M]。北京：电子工业出版社，2011。
6·Both gage styles include a receiver gage configuration designed for the pneumatic transmission of process variables.
这两种规样式包括一个接收规配置的过程变量气力输送设计。
7·The pneumatic transmission system is used more and more widely as a result of its actuating medium not polluting environment.
气压传动系统由于其工作介质环保，使用越来越广泛。
8·Furthermore the GA was reformed according to the characteristics of pneumatic transmission system and used on the optimization. This CAD syst...
此外，还根据气压传动系统的特性对遗传算法进行了改造，并将其应用到典型气压传动系统的优化中。
9·The problems were essentially resolved through fatigue analysis and optimization of the structure of feed bin of PTA pneumatic transmission channel.
通过对PTA气送糟料仓的结构进行疲劳分析和优化，从根本上解决了其裂纹和焊缝撕裂现象。
10·When a pneumatic transmission system is employed, the measurement signal is converted into pneumatic signal by the transmitter scaled from 0 to 100 percent of the measured value.
当使用启动传送系统时，测量信号就由变送器将比例为0% ~ 100%的测量值转换成气动信号。