1·The paper describes key conditions in the process of producing nickel sulfate using nickel waste.
本文叙述了用含镍废料生产硫酸镍时，工艺过程中的关键条件。
2·Preparation of nickel sulfate from waste catalyst of hydrogen peroxide production (anthraquinone method) is summarized.
概述了利用蒽醌法生产过氧化氢时所产生的废触媒制备硫酸镍的方法。
3·A method for recovering nickel in hydrogenate used catalyst of hydrogen peroxide in nickel sulfate form has been developed.
研究了从双氧水氢化废镍催化剂中以硫酸镍形式回收镍的工艺方法。
4·The nickel glycinate is obtained after nickel sulfate or a crystalline hydrate of the nickel sulfate is mixed with a glycine aqueous solution to react.
该甘氨酸镍是将硫酸镍或者硫酸镍的结晶水合物与甘氨酸水溶液混合进行反应后得到。
5·The process is simple and gains good economic benefits, providing a new way for the recovery of nickel sulfate from the liquid waste of copper electrolysis.
该工艺操作简便，为回收铜电解废液中的硫酸镍提供了一条新途径。
6·A new technology of electroless nickel plating for magnesium alloys was developed by addition of fluoride in bath and using nickel sulfate as nickel resource.
向镀液中加入氟化物，采用硫酸镍代替碳酸镍作为镍源，开发出一种镁合金化学镀镍新工艺。
7·Nickeltungsten alloy coating was deposited on copper plate making use of electroplating in the bath composed of nickel sulfate, sodium tungstate, and trisodium citrate.
采用硫酸镍、钨酸钠和柠檬酸三钠为基本组分的镀液，通过电镀的方法在紫铜试片上沉积得到了镍钨合金镀层。
8·The process flow extracting Copper and Nickel sulfate from electroplating sludge is put forward. The economic barometer of technology procedure is investigated by test.
提出了含铜含镍电镀污泥综合利用的工艺流程，并用试验考察了各工序的技术经济指标。
9·Electroless nickel plating on magnesium alloys in nickel sulfate bath is studied, obtaining optimal formulations for the pickling, activating and nickel plating processes.
研究了镁合金硫酸镍化学镀镍工艺，得到了最佳的酸洗、活化及镀镍液配方。
10·The process for electroless nickel plating of AM60 magnesium alloy in a nickel sulfate bath, based on etching in acidic molybdate and activation in alkali molybdate, was studied.
采用酸性钼酸盐酸洗、碱性钼酸盐活化工艺，研究了AM60镁合金上硫酸镍溶液体系化学镀镍的方法。