1·It is a neutral salt.
这是一种中性盐。
2·The standards and the comment process of neutral salt-fog test for organic coatings are introduced.
介绍了有机涂层中性盐雾试验的相关标准及其评价方法。
3·An appropriate after treatment can improve the abrasive and neutral salt spray resistance of the film.
合适的后处理工艺可提高镀层的耐磨性和抗中性盐雾能力。
4·Its results have better consistency than those obtained by methods of weight loss and neutral salt spray.
结果与失重法和中性盐雾试验法相比，有较好的一致性。
5·The results show that it is practicable to titanize by neutral salt bath in the electrode salt bath furnace without crucible.
结果表明，在无坩埚的电极浴炉中进行中性盐浴渗钛是可行的。
6·The black inactivating film is homogeneous, and the inactivated coating, test shows, has a no red rust period longer than 1000 hr in neutral salt fog.
所获得的黑色钝化膜外观均匀，镀层钝化后经中性盐雾试验(连续喷雾)出现红锈(基体腐蚀)的时间大于1000小时。
7·Various performance tests (neutral salt spray, metallic coating binding force) about rhodium plating on different substrate metal material were also studied.
同时通过中性盐雾实验、镀层结合力测试，研究和比较了不同基材上铑镀层的性能。
8·Based on the study of the bubbling phenomena around the crosscut of coatings film in neutral salt spray test, this article has analyzed the cause of bubbling and proposes effective solutions.
通过对中性盐雾试验中漆膜划痕处起泡现象的研究，分析了起泡产生的原因，提出了相应的解决方案。
9·The corrosion resistance of deposits and covering power of the plating bath were tested respectively by neutral salt spray test and inner-pole method, and the hardness of deposits was also measured.
采用中性盐雾试验测定了镀层的耐蚀性，采用内孔法测定了镀液的覆盖能力，并测定了镀层的硬度。
10·The correlativity between neutral salt spray accelerated test and atmospheric corrosion test in Shijiazhuang was studied by the mass loss determination of 45 steel, A3 steel, 20 steel and gun steel.
以45钢、A3钢、炮钢、20钢为金属试样，研究它们在中性盐雾加速试验及石家庄大气环境暴露试验中腐蚀失重与时间的变化规律。