1·The position of plastic hinge will effect the direction and ability of moment redistribution.
预应力框架中塑性铰形成的位置不同，弯矩重分布的方向和能力也不相同。
2·The proposed formulae for the moment redistribution ratio are valuable to the design of continuous composite beams.
据此，对连续组合梁的负弯矩调幅系数提出了建议。
3·Most of the research on moment redistribution is based on continuous beam structures, a little on prestressed concrete frames.
关于预应力结构的内力重分布研究很多是关于连续梁结构的，对预应力框架的研究相对较少。
4·The emphasis of the paper is placed on the influence of the secondary moment and the axial prestress on the moment redistribution.
重点讨论了预应力连续梁中次弯矩和轴向预压力对弯矩调幅的影响。
5·In this paper the moment redistribution due to prestressing in precast segment continuous prestressed concrete beam erected by cantilever method is described.
本文叙述了悬臂拼装预应力混凝土连续梁的预加力引起的弯矩重分布。
6·On the other hand, though increasing axial compression ratio of column changes the moment redistribution in frame, the effect on ultimate loads and total modulations is insignificant.
另一方面，随轴压比增大，梁柱上弯矩分配虽略有变化，但对整榀框架的极限承载能力和总的弯矩调幅能力影响不大。
7·The redistribution of moment of model beams and its effect factors are studied and analyzed.
研究并分析了体外预应力混凝土连续梁弯矩重分布的规律及其影响因素。
8·The effect of PPR on the redistribution of bending moment was discussed.
讨论了部分预应力比PPR对连续梁内力重分布的影响；
9·The moment modulation method is one kind of the design method for reinforced concrete continuous beams and frames considering redistribution of internal forces, which has been used for many years.
弯矩调幅法作为钢筋混凝土结构考虑塑性内力重分布分析方法中的一种，已在我国广为应用多年。
10·The redistribution behavior of internal plastic force and the moment modification limited value of tubular hollow continuous slab were studied through experiment and theoretical analysis.
试验与理论结合，研究了圆管式空心连续板的塑性内力重分布性能与弯矩调幅限值问题。