1·With a decrease in the mole ratio, volatilization of sulfur decreased rapidly.
随着克分子比的降低，硫的挥发率也急剧下降。
2·Mole ratio is the key factor that influenced the formal de hyde content of urea resin.
降低人造板甲醛释放量的关键在于使用低游离甲醛树脂胶。
3·The effects of temperature, pressure, mole ratio and space-velocity on the reaction were discussed.
本文讨论了反应温度、反应压力、空速和原料配比对反应的影响。
4·The contrast decreased when triiodide was added near the surface of the grain, or when the mole ratio of io…
但是，乳剂的反差随着三碘化钾溶液加入位置逐渐靠近表面而不断降低，随着碘化钾和碘摩尔比的增加迅速降低。
5·The mole ratio of main raw materials and reaction temperature, time and pressure are examined by multi-factor test.
利用正交试验对反应中主要原料的摩尔比、反应温度、反应时间、反应压力的影响进行了考查。
6·Such reaction conditions as catalyst type, reactant mole ratio, water-carried agent and temperature were determined.
考察了催化剂、反应物的摩尔比、带水剂、反应温度等对反应的影响。
7·The catalyst quantity, alcohol-acetic mole ratio, feed rate and reflux feed site effects on the process are investigated.
对醋酸与正丁醇酯化反应体系，考察了催化剂用量、醇酸比、进料流量、进料位置、回流位置等因素对过程的影响。
8·Effects of mole ratio of 1, 2- ethanedithiol to isovaleraldehyde, amount of catalyst and refluxed time were investigated.
研究了乙二硫醇与异戊醛物质的量比、催化剂用量、反应时间等因素对反应收率的影响。
9·The kinetics of the polycondensation between diphenyl-dichlorosilane and bisphenol-A in equal mole ratio has been studied.
研究了二苯基二氯硅烷与双酚-A在等克分子比条件下的缩聚反应动力学。
10·The effects of reaction temperature, catalyst amount and mole ratio of water to methyl acetate on conversion were investigated.
实验还测定了反应温度、催化剂用量和水酯比对乙酸甲酯水解率的影响。