1·After the completion of the molded part is called standard mold design, 3d design to achieve a whole deputy mold.
完成成型零件的设计后调用标准模架，实现了整副模具的3d设计。
2·For larger molded parts, material typically represents more than 50% of the part cost for a refrigerator crisper tray.
对冰箱蔬果盘之类的大零件而言，材料往往占成本50%以上。
3·The strain change caused by performing punching to the resin molded part on the surface of the molded part is measured.
对因对树脂成形品打孔产生的、成形品表面的应变变化进行测定。
4·A complicated model for an injection molded part may have a thousand features, and modifying an early feature may cause later features to fail.
为一个注模零件制作的复杂模型可能包含上千个特征，修改早先建立的特征可能导致后续特征创建失败。
5·Based on the variation of temperature in injection molded parts, the simulation of cooling takes consideration of the cooling stage of the part after ejection.
以注塑制品的温度变化为对象，考虑了注塑制品出模后的冷却过程。
6·This paper discusses the three factors that affect the deformation of injection molded parts:simple nonuniform shrinkage, part cooling and molecular orientation.
本文分析了注塑成型过程中简单收缩、 冷却、 分子取向等因素对注塑件变形的影响。
7·The temperature, injection speed, injectionjectio n pressure, and holding pres sure of the injection molding process should be controlled to achieve high quality of injection molded part.
温度、注射速度、注射压力和注射成型过程的保压压力是获得较高制品质量的重要影响因素。
8·Mold parting direction is an important factor to verify the moldability of a molded part and its determination is the first step to achieve automatic design of injection mold or casting die.
判定脱模方向是实现模具自动设计的第一步，也是评估塑件或浇注件能否模具成型的重要因素。
9·Researchers are seeking to define the proper water temperature, pressure, and flow rate, as well as the effect of internal water quenching on resin crystallization and molded part properties.
研究人员正在试图确定水温、流量、零件腔内水的冷却作用对树脂结晶和注射件性能的影响。
10·The key was a plastic "ribcage," a complex molded plastic part that pushed the limits of injection-molding tooling technology.
其中的关键是一种塑料特征“筋墙”，这是一种比较复杂的注塑塑料零件，达到注塑技术的极限。