1·Introduction was made to a new kind of molded case circuit breaker over-current protection system.
介绍了一种新型塑料外壳式断路器的过电流保护系统。
2·The software revision method of current transformer (CT) for molded case circuit breaker was pre - sented.
提出了塑壳式断路器用电流互感器(CT)的软件修正方法。
3·A digital molded case circuit breaker (MCCB) automatic protection characteristic test platform was developed.
开发了一种数字式全自动塑壳断路器保护特性检测台。
4·The opening time of movable contact has remarkable effect on the limiting current performance of low voltage molded case circuit breakers.
触头打开时间对于低压塑壳式断路器的限流性能有重要意义。
5·Molded case circuit breakers usually contain thermal-magnetic trip units, although larger sizes can be equipped with solid state trip sensors.
塑壳断路器通常含有热磁跳脱单元，而大型号的塑壳断路器会配备固态跳脱传感器。
6·Kit includes: Power probe III, cigarette lighter adapter, 3 "extention probe, battery hook-up clips, 20 ft. extention lead, instruction manual, blow molded case."
套件包括：电源探头三，打火机适配器，3“延伸探头，电池钩了剪辑，20英尺延伸铅，使用说明书，打击塑壳。”
7·A novel dynamic model of molded case circuit breaker operating mechanisms was built based on multi-body dynamics principle adopting virtual prototyping technology.
采用基于多体动力学原理的虚拟样机技术，建立了塑料外壳式断路器操作机构的动力学模型。
8·Molded case circuit breaker a molded case circuit breaker automatically interrupts the current flowing through it when the current exceeds the trip rating of the breaker.
塑壳断路器塑壳断路器能够自动切断电流在电流超过跳脱设定后。
9·CM3 molded case circuit breaker (MCCB) with thermal overload alarm but non-release function was introduced. It integrates part function of thermal overload relay and function of MCCB.
介绍了一种具有热过载报警不脱扣功能的CM 3塑料外壳式断路器，其将热过载继电器的部分功能与MCCB的功能有机地结合在一起。
10·Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 1600 V. Maximum average forward rectified current 1.0 a.
硅整流。案例模压塑料。经常性最大峰值反向电压1600五，最大平均整流电流1.0 A。