1·Within -30% of initial measured value.
在初始测定值的- 30%以内。
2·As a result, a measured value using this method is not reliable.
因此采用这种方法测得的数值是不可靠的。
3·This measured value is then used to correct the programmed tool path.
然后用此测量值纠正编程路径。
4·The arithmetic average value of the records shall as the measured value.
以每小时读数的算术平均值作为测定值。
5·The average error of reaction rate between calculated and measured value is 4.38 %.
反应速率的实际测定和计算值平均误差为4 - 38 %。
6·Experiments show a strong effect on the measured value if collimation Angle is increased.
实验表明，准光角增大会对测定值产生很大的影响。
7·There is very good correlation between the measured value of this method and the ISO method.
这种方法测得的数值与国际标准化组织测量的方式有很好的关联性。
8·The calculation value of land subsidence from 1969 to present agrees the measured value well.
从1969年至今的地面沉降实测值与计算值也相吻合。
9·The measured value of integrated thermal neutron flux was compared with the calculated value.
测得的热中子积分通量值与计算值作了比较。
10·Through comparing the calculated with measured value, the accuracy of model are made checkout.
通过计算与实测值的比较，对模型精度作了检验。