1·It's important to put a lock washer on that last nut, or it can work loose.
重要的是要在最后一个螺母上安装一个防松垫圈，否则它会逐渐变松。
—— 《柯林斯英汉双解大词典》
2·They are made up of sleeve, lock nut and lock washer.
它由称套、锁紧螺母、锁紧垫圈组成。
3·Only lock washer or embroidered eyes and nose are used for safety.
只有垫圈或绣眼睛和鼻子被用于安全。
4·Aurora only USES lock washer or embroidered eyes and nose for safety.
极光只使用垫圈或绣眼睛和鼻子的安全。
5·Hold stem (27) on wrench flats and remove nut (51), lock washer (46), diaphragm plate (60) and diaphragm.
在扳手的平面上握住阀杆(27)并拆卸螺母(51)，锁紧垫圈(46)，隔膜板(60)和隔膜。
6·Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.
松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。
7·NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.
注：如果出现少量的泄漏，则拆卸锁紧螺丝，然后锁住垫圈和阀盖，然后轻轻紧固填料压紧螺母。
8·Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip.
小尺寸轴承使用带锁紧垫圈的锁紧螺母大尺寸的轴承使用带锁紧卡箍的锁紧螺母。
9·Our main products include washer assembly machines, hydraulic automatic slot milling machines, check weighers, deep-hole drilling machines, and zip lock bags. We can also customize various machines.
华司组合机，液压自动铣槽机、钻尾螺丝机、选别机、深孔机、攻牙机、自动车床以及夹链胶袋头，及来图订做各类机机械。