1·Taking advantage of geometrical relationship the efficiency of the method has been improved greatly.
通过利用几何相关性，提高了算法的效率。
2·Object location is defined as coming up with three-dimensional coordinate expression through binocular vision model analysis using geometrical relationship.
目标定位是通过双目视觉模型分析，利用空间几何关系，最后提出了目标点的三维坐标计算表达式。
3·Geometrical relationship among the length of triangle sides is used to determine the Angle of rotation, the cone can be machined without using measuring instrument.
利用圆锥三角形边长的几何关系来确定转动角度，可以不用测量仪器加工出圆锥体。
4·Based on limit equilibrium theory, a basic coordinate system and an auxiliary coordinate system are set up according to the size and geometrical relationship of slope.
基于极限平衡理论，根据边坡尺寸及几何关系，建立辅助坐标系与基本坐标系。
5·According to the characteristics and geometrical relationship of involute coils, the writer derives the formula and obtains a method for calculating the involute coils.
根据渐伸线型线圈的特点和几何关系，推导出求解渐伸线条式线圈的计算公式和方法。
6·Geometrical relationship between low limbs and rules of human motion are used to partially solve the problem of self-occlusions, which makes the tracking more continuous;
针对人体运动过程中存在的五种自遮挡现象，分别利用人体下肢在运动过程中的规律和几何关系，部分地解决了肢体运动的自遮挡问题，使跟踪过程更连续；
7·By analyzing the interaction of the locomotor charges and using simple geometrical relationship and the Coulombs law, we provide a new interpretation for the Ampere force law.
目的在于避开磁场概念 ，只从静电场理论的角度讨论电磁问题 ，通过对运动电荷相互作用力的分析 ，运用简单的几何关系和库仑定律 ，重新诠释了安培力定律。
8·Besides, following the constraint of the member geometrical sizes and stiffness, this paper has set up the relationship between member section sizes.
遵循杆件应力约束、几何尺寸约束、刚度约束条件，建立了杆件截面尺寸相互关系式。
9·Then, the geometrical model is changed to the mathematical model, and the relationship among the parameters of the chamfering shape and the tool adjustment is analyzed quantitatively.
对于平面倒角首先建立了加工过程的几何模型，然后推导出数学模型，建立了倒角形状参数与机床调整参数之间的联系。
10·In this paper, the special feature of international standard of geometrical parameter tolerances and the relationship between linear size tolerances and geometrical tolerances are analyzed.
本文分析了几何参数公差，以及线性尺寸公差与几何公差之间关系的国际标准的特点。