1·High precision special crown gear teeth.
高精度专用冠齿轮牙齿。
2·Gear teeth in mesh.
齿轮互相啮合。
3·Exact modeling of gear teeth is based on meshing theory.
摘要根据齿轮啮合原理,建立了轮齿的精确齿形。
4·Based on gear engagement theory, the exact model of gear teeth is produced.
根据齿轮啮合原理,建立了轮齿的精确齿形。
5·Just like with spur gears, the solution to this problem is to curve the gear teeth.
就像直齿轮一样,这个问题的解决也是将轮齿变为曲线。
6·In this paper reasons of premature failure of gear teeth of coal mining machinery are analyzed.
本文分析了煤矿机械齿轮早期断齿的原因。
7·The test of Pb samples indicates that the die set works smoothly and gear teeth are filled fully.
根据铅试样模拟实验表明,模具装置工作顺畅,齿轮成形饱满。
8·The gear teeth engagement of gear transmission was being studied as a Non-Hertz elastic contact problem.
并采用赫兹接触理论和有限元方法分析渐开线齿轮的接触应力。
9·To transmit motion smoothly, the contacting surfaces of gear teeth must be carefully shaped to a specific profile.
为了平顺地传递运动,齿轮齿的接触面必须精加工成特殊齿廓。
10·Disadvantages: the gear teeth due to smaller displacement volume and will wear, so can only transport clean fluid;
齿轮泵缺点:由于较小的置换容积以及会磨损齿牙,所以只能输送干净的流体;